News

In traditional pneumatic systems, the most common lubricating medium in pneumatic cylinder tubes is pneumatic lubricating oil (also known as pneumatic-specific oil). This type of oil typically has the following characteristics: • Low viscosity • Easy atomization • Compatible with compressed air • Less prone to carbon buildup • Friendly to sealing materials

• High-quality industrial-grade pneumatic cylinder barrels typically achieve 3 to 5 million cycles. • High-end pneumatic cylinder barrels can achieve 10 million cycles under ideal conditions.

Among the many causes of failure, contaminant blockage and intrusion are one of the most common and fundamental causes of pneumatic cylinder tube failure.

A double-acting pneumatic cylinder barrel is a pneumatic structure where the piston is driven by compressed air in both its extension and retraction directions. A double-acting pneumatic cylinder barrel requires at least two ports for air intake. These two ports correspond to the air chambers on either side of the piston, and are necessary for bidirectional drive.

The operating pressure of a pneumatic cylinder tube is typically below 8 MPa. In most industrial pneumatic systems, the common operating pressure ranges are: • 0.4 MPa • 0.5 MPa • 0.6 MPa • 0.8 MPa

Double-acting pneumatic cylinder barrels have the following significant advantages: • Bidirectional drive, high control precision • Adaptability to complex loads and high-frequency operation At the same time, there are also significant disadvantages: • More complex air circuit structure • Higher air consumption